As the temperature drops, many people are gearing up to combat the cold with their heaters. New homeowners or those getting a heater replacement may be intimidated by the prospect of trying to figure out which kind of heater installation is best for their home. Don’t worry, the passionate HVAC specialists at Siboly have created a guide to help you decide which one is best for you. Ok, we have listed four main things that you need to know when deciding between a gas and electric heater.

1. Pricing

When it comes to pricing, you have to take installation and operation costs into consideration too. Electric heaters have a cheaper initial installation cost(even ZERO), because they do not need to have a chimney in order to operate, making them easier to install.

While gas heaters may be more expensive initially, they are a lot cheaper to run compared to electric heaters because gas is less expensive overall than electric. A gas heater may end up saving your money in the long-term.

2. How Does It Work?

Both of gas and electric heaters can each be classified into two different types. While each of these heaters do similar work, they function differently.

Electric Heaters

Radiation Heater: A radiation heater heats the air by warming up a heating element inside of a glass envelope. It begins to emit the heat as infrared radiation once this glass envelope reaches a certain temperature. A reflector inside of the heater redirects the heat towards the room where it moves around until absorbed by furniture or a body. These types of heaters are best for spot heating, such as in a specific room or office space.

Convection Heaters: Convection heaters work by creating a fluid movement of hot and cold air. The air around the heater is warmed, forcing it to rise, and cool air fills the gap left behind by the warm air. This creates a constant airflow of warm air. As with radiation heaters, this type of heater is best when used in a closed space, such as a singular room or within an office. These types of heaters can either be oil or ceramic filled. 

Gas Heaters

Flued Heaters: This type of heater has to be permanently installed into a home or building and requires a flue, or chimney, to remove the emitted gas. A flued heater uses combusted gas which heats up the air around it. The consumed gas is emitted in order to ensure the safety of the home. This type of heater is fantastic for heating up large spaces.

Non-Flued Heaters: This type of gas heater is vent-free. It is best to put this type of heater near proper room ventilation, such as a window. This type of heater works similarly to the others mentioned above; it combusts gas in order to warm up the air around it and which then moves around the room/home.

3. Safety Concerns

While deciding which type of heater is best for you, please understand safety is always a priority. Here are the safety concerns to keep in mind:

Electric Heater Safety Concerns

Radiation heaters produce intense heat which causes the surface to get extremely hot. Combustible materials should be kept well away from this type of heater as they could catch fire. There is also a risk of burning yourself if you accidentally touch the hotspots of the heater.

Gas Heater Safety Concerns

Gas heaters produce dangerous gasses such as carbon monoxide and nitrogen dioxide. While a flued gas heater has a chimney to get rid of the dangerous gas, a ventless one does not. It is highly recommended to turn off a non-flued gas heater during the nighttime to prevent the potential build-up of hazardous gasses.

4. Which Type of Heater is Best?

It's really hard to tell which heater is best. Electric and gas heaters are designed to meet different needs. If you need to heat a smaller space, an electric heater would be better for you, but a gas heater is probably better suited for a larger space. Your decision should be based on your and your family’s actual needs.

Still have some questions about which type of heater would work best for your situation? Contact Siboly! Our dedicated and passionate staff would love to help you find the perfect heater for your home.

It's hot summer time. Day temperature in most cities has either touched 35 degrees or even higher. If you are planning to buy cooler to beat the heat, here are some small tips to make your buying decision easier. 

Personal coolers vs Desert coolers, decide the type

Selecting the right type of cooler is important for effective cooling. For smaller and medium sized rooms, choose personal coolers. For larger rooms, Desert coolers may be a better option. Here's a size chart that one can consider.

Room size between 150sqft to 300sqft: Personal coolers

Room size bigger than 300sqft: Desert coolers

Water tank capacity

Water tank capacity is an important factor in air coolers. Here the maths is simple: Bigger the cooler size, the bigger will be the tank capacity. Always choose a higher capacity air cooler than the room size for effective cooling.

Small rooms: 15 litre

Medium-sized rooms: 25 litre

Large rooms: 40 litre and above

Where you need to keep the cooler

Go for Desert coolers if you are looking to place a cooler outside the room or in your backyard or terrace. For indoor usages, personal or Tower coolers are more suitable.

Keep the climate of the place under consideration

Desert coolers are more effective in dry climate conditions. For humid areas, personal/tower coolers are usually more effective

Check the noise level

Some coolers can be very noisy. So, it is important to check the noise level of the cooler before purchase. And make sure you check the noise level at maximum fan speed.

Look for auto fill function

Refilling a cooler can be a cumbersome task. Opt for the coolers that offer autofill function. They are not only easy to manage but are also said to offer better and more efficient cooling. Also, the auto fill feature will prevent the tank from getting complete dry, hence preventing the motor from getting damage.

Quality of cooling pads

Cooling pads is one of the most important parts of a cooler. There are different types of cooling pads available for coolers. Most common ones are wool wood, aspen pads and honeycomb pads. Honeycomb cooling pads are better than the other two as they offer long lasting cooling and are also low on maintenance.

Additional ice chamber adds to the cooling

For faster cooling, some cooler manufacturers have added a dedicated ice chamber to the coolers. You can add ice cubes to them to cool the water in the tank quickly.

Power consumption

Look for power efficiency. Usually, modern coolers come with inverter technology that allows them to run even on inverters in case of power cuts.

Can look for additional features like Remote control, anti mosquito filtre, etc

Coolers nowadays offer additional features like remote control, anti mosquito, dust filtre, etc. Look for them if budget is not a constraint.

Choosing and installing commercial air coolers requires careful consideration to ensure optimal performance and efficiency. Here are some key steps to follow:

1.    Determine Cooling Requirements: Assess the cooling needs of your commercial space, including the size of the area, temperature requirements, and the number of occupants. This will help you determine the cooling capacity and airflow required for the air cooler.

2.    Research Different Types of Air Coolers: There are various types of commercial air coolers available, such as top discharge evaporative coolers and bottom discharge evaporative coolers. Research and compare the features, benefits, and limitations of each type to identify the one that best suits your requirements.

3.    Assess Installation Space: Evaluate the installation space to determine if it can accommodate the air cooler. Consider factors such as ventilation, accessibility for maintenance, and electrical requirements. Ensure that there is adequate space for proper air circulation.

4.    Consult with Professionals: If you are unsure about the selection and installation process, it is recommended to consult with professionals or HVAC specialists. They can provide expert advice and assist in selecting the appropriate air cooler for your needs.

5.    Follow Manufacturer's Guidelines: When installing the air cooler, carefully follow the manufacturer's guidelines. This includes instructions on positioning, airflow direction, electrical connections, and any specific installation requirements. Adhering to these guidelines ensures optimal performance.

6.    Regular Maintenance: Once installed, regular maintenance of the air cooler is essential to keep it in good working condition. Follow the manufacturer's recommended maintenance schedule, which may include cleaning the filters, checking for leaks, and servicing the unit periodically.

Remember, proper selection and installation of a commercial air cooler are vital for its effectiveness and efficiency. Consider the specific needs of your space, seek professional advice if necessary, and adhere to manufacturer recommendations to ensure optimal cooling performance.

How To Clean Your Air Cooler At Home

You can easily clean your Air coolers at home using some regular cleaning materials. Regular cleaning can help improve its functioning and cooling performance. 

During this scorching heat, air coolers are our real saviors. We can't really imagine our day without them, especially now when the temperature is rising like anything. 

There is nothing more satisfying than sitting in front of an air cooler on a hot summer day and sip on our favorite cold beverage. Agree?

However, there are days when our air cooler stops to cool our room the way it usually does. Why? That's an alarm that your air cooler needs some cleaning or servicing. During this pandemic, you might not feel safe to ask a professional to service or clean your air cooler. 

No worries! You can clean your air cooler at home too. Here, we thought of bringing you a quick guide that will help you clean your air cooler on your own at home. 

Step 1: Remove The Panel/Cooling Pads

Firstly, remove the panel or cooling pads of your air cooler. Make sure the cooler is off. Clogged cooling pads can be one reason why your air cooler is not functioning properly so take them to the washing area for thorough cleaning. 

Step 2: Clean Cooling Pads

With time, dust and dirt start to accumulate on the surface of the cooling pads which directly affects the airflow. The air cooler doesn't function properly and there is also an increase in the power consumption. 

Place the cooling pads under running water or use a pipe to clean them properly. You can use a water pipe. Make sure you clean every corner of the cooling pads. Use some dish soap and a sponge to clean the cooling pads. Gently scrub the sponge over the cooling pads.

Step 3: Drain The Water And Clean

Drain the water from the tank and properly clean the water tank using warm water and some soap. Clean the inner walls of the air cooler properly and then rinse with clean water. 

Step 4: Wipe The Interiors With A Wet Cloth

Next, it is time to clean the interiors and exteriors of the air cooler with a wet cloth. Not just the interiors, if there are any dirt or dust particles on the outside of the air cooler, they can affect the air cooling. Clean every corner properly. 

Step 5: Reassemble All The Parts

Now that you have washed the cooling pads and the interiors of the air cooler, time to fill in the water in the tank and place back the cooling pads. After reassembling the cooler, the air cooler is ready to use! 

Tips To Keep In Mind

Most people think air cooler doesn't need enough maintenance but they do. If not regular cleaned, the dirt that keep accumulating on the pump or cooling pads can affect its performance. Regularly dusting and cleaning can help you ensure good cooling. 

Cooling pads need to be cleaned once a month or as per everyday usage. The cooling pads soak up moisture from the surroundings and then cool the air that passed through them. If you want good cooling at your home, you need to clean these pads once a month. 

Industrial evaporative coolers consume ~90% less energy than traditional AC units while cooling large spaces—cutting operational costs by thousands annually.

Indoor air often contains a range of pollutants, allergens, moisture, and dust in places with poor ventilation, to remove these airborne pollutants, exhaust fans are often used for air ventilation, circulation and even cooling. Here are the most common applications of exhaust fans:

Chemical Factories or Coal Pit which contains flammable gases or chemical materials.

Explosion resistant exhaust fans provides exhaust to help remove heat, condensation and noise, great for places with poor ventilation which require superior heavy-duty air exhaust, such as electroplating factory, heat treatment factory, chemical factories and coal pit.

Ordinary Factories: industrial exhaust fans helps to get ride of excess heat, moisture, and unpleasant fumes from the assembly workshops, woven factories, plastic factory, die casting factory, shoes factory, And it helps to provide moisture and cool the room with the help of evaporative cooling pads.

Agricultural Applications: air suction exhaust fans remove excess heat, odors and humidity,ideal for use in large barns, diary houses, greenhouses and poultry farm.

Commerical Applications: the quiet exhaust blower fan removes excess heat, moisture and even unsavory smells from residential or commercial locations, such as restaurants, garages, office buildings and warehouses.

Air coolers are not strange to everyone, but when it comes to mobile evaporative air coolers, many people have not come into contact with them. However, with the continuous development of modern technology, mobile environmentally friendly air coolers are more and more accepted by everyone. What is a mobile environmental protection air conditioner? This kind of air conditioner is what we call a mobile water air conditioner. It is different from the air conditioners we usually see. Yes, or it is fixed in a certain place like a central air conditioner. This type of air conditioner is obviously different from these two types. It is very small in size and can be moved according to everyone's needs. Which space is hotter? You can move it to which space for cooling.

The mobile environmental protection air conditioner has also been loved by more and more people because of its super high cost performance. We know that to buy an air conditioner, it costs as little as several thousand yuan, and it needs to be specially hired for on-site installation, and it needs to be installed outside the air conditioner for drainage, etc., and these air conditioners in general households are not easy to move, and they are usually fixed in One location. And this kind of mobile environmental protection air conditioner is cheaper than ordinary air conditioners, and it is more energy-efficient than air conditioners, and cooler than electric fans, so it is very economical and affordable. In many factories, mobile environmental protection is used. Air conditioning is used for refrigeration.

The portable air cooler also has many advantages in other aspects. It does not need to be installed. After purchase, it can be directly moved to the required location and plugged in according to the needs. Moreover, it can be used indoors or outdoors at the same time, which is very flexible. . Speaking of its cooling effect, like ordinary air conditioners, cooling also requires waiting time, but for this type of air cooler, it has a very fast cooling effect and can achieve high-speed operation to achieve rapid cooling. Of course, the operation and maintenance cost of this environmentally friendly air conditioner is also very low, which is acceptable to the public. So if you have this kind of demand, it is strongly Amway that everyone can choose to buy mobile environmentally friendly air conditioners. The price/performance ratio is really super high.

Common Problems & Suggested Solutions

1.       Inadequate cooling

(1)    Wrong adjustment of the float valve and low water.

Please adjust the water level in range of 80 to 100 degrees.

(2)    The drain valve is stuck.

Please change a new drain valve.

(3)    The water distributor is silt up.

Please clean water distributor.

(4)    The filter is too dirty.

Please clean filter.

(5)    The water supply pipe is silt up.

Please clean the water supply pipe.

(6)    Check the pump to see if it burns out or not.

If it burns out, please change a new one.

Besides the reasons shown above, inadequate cooling also could be caused by the following reasons: lower water pressure, no water inlet of float or solenoid valve.

2.     Water leakage

●     Leakage from drain valve

(1)    The drain valve is stuck by dirt and cannot be closed properly.

Please clean the drain valve and remove the dirt or dust.

(2)    When installing the filter, the float valve is pressed by the screen which makes water into it continuously.

Please check the filter and reinstall it correctly according to the user guide.

(3)    Sealed spacer in the float valve is damaged.

Please change a new spacer.

(4)    The water tank is slant.

Please adjust it to the level.

Besides the reasons shown above, water leakage also can be caused by the following reasons high water inlet pressure, which makes the float valve unclosed and causes high water level.

●     Leakage from air pipe

(1)    The filter is broken.

Please Change a new one.

(2)    There is burr in the surface of filter and makes water into the venturi.

Please make sure that the surface of filter is smooth.

(3)    Filter is too dirty and stuck by dirt.

Please clean it and remove the dirt.

(4)    The water distributor is too dirty and water is absorbed into the venturi from the water distributor.

Please clean the water distributor.

(5)    The rubber tube in the cooler is broken.

Please change a new one.

(6)    Unqualified installation of canvas soft connection and it can cause waterlogging in the canvas when raining, and then water comes into the venturi.

Please adjust the canvas soft connection.

(7)   The waterproof-glue of the air pipe drops. And when raining, rain comes inside from the gap of the pipe.

Please wipe the waterproof-glue again.

●     Leakage from metal water-inlet flexible-hose

The flexible-hose is aged or broken and water leakages from it.

Please change new flexible-hose.

3.       Too much noise

●     The motor fastener is loose.

Please tighten it.

●     The venturi cocks when the cooler is under transport or installation.

Please adjust the venturi.

●     The motor bearings get stuck.

Please change the bearings or motor.

●     Fan blades are loose.

Please tighten them.

●     The air pipe is not installed correctly according the design.

Please modify the installation.

1.  General Rules

The construction requirement and attention matters:

•Make sure the safety in high-altitude operations, there are at least 2 workers to install the machine. Worker who outside the window must fasten the seat belt, and other worker should protect the partner's safety.   Without safety measures shall be strictly forbidden when install the machine at the exterior wall. 

•It is forbidden to go barefoot during construction, especially the operator who work at the outer wall must wear rubber shoes or sneakers, slippers are forbidden. 

•Must pay special attention to the fire safety: in the construction work site is strictly prohibited to smoke, when welding operation and sectcuting operation must ensure that no inflammable and explosive goods piled up operation scope, air cooler belong to flammable goods, must stay away from workplace before lifting the scene; 

•The air cooler must put in ventilated and empty place, do not put near to the smelly, heat source and rest area, especially must far away from the fire.

2. Tools and spare parts for installation

3.  Platform fixation

Use the string to fix the bracket, then put down the bracket in slowly, the worker should go down through the special ladder, to confirm the place to the bracket, then use the drilling machine to make hole, after put the sets screw, the other side is in the same, must make sure the bracket is put in same level. The worker should fasten the seat belt and make sure the fire safety.

4.  Cooler Installation

After the bracket installation finish, put the air cooler equipment first. Use the string to fasten the air cooler, put down in slow, and the workers should fasten the seat belt, wear the slipper is forbidden. After the machine installation, please also clear the water tank of the air cooler, in case blocking in the future.

 5.  Air diffuser & Water System

Summer is a poetic season. In this wonderful season, the hot weather often makes us feel difficult to adapt. The use of air conditioners now makes our lives more comfortable. Air conditioners are constantly changing with the development of the times. It has begun to develop more and more in the direction of environmental protection. Our portable evaporative air cooler makes us not need to consider health issues, because we feel very uncomfortable if we stay for a long time in a relatively cold situation, which leads to I have a health problem. But this kind of air conditioner is different. It is based on human health, so it has improved a lot of functions, but in the process of using, the temperature adjustment should be reasonable, generally it is between 28 and 29. Within the range.

Environmental-friendly desert air cooler makes us feel the convenience of life, and allows us to enjoy our lives as we wish, so it has brought us a poetic life and a different summer. It is an energy-saving air cooler, and it also has a cooling effect. In addition, it also has the effect of ventilating during the use of it. Of course, it is also one of the air conditioners that prevent dust and can also remove some odors. It has a wide range of applications, not only in the home, but also in some factories and large supermarkets.

Environmentally friendly swamp air coolers make the air in various places look fresh. It is precisely because of its wide range of applications that businesses have found commercial opportunities in this area. Nowadays, there are many manufacturers of such air conditioners, and these manufacturers are also There is strong competitive pressure. If you want to stand out from the competition, you still have to take relevant measures and methods, mainly innovation in product functions and maintenance of product quality. If these meet certain requirements, then Such a manufacturer can become the leader of the industry, allowing products to have a better development trend in the industry.